Erbe VIO 100 C, Service Manual

Page: 17 / 42

17
/ 42
4 • Service mode
801
16-
221

10.
15
22 Activation
period limit
Setting of the unit
activation period
between 1 and
99 seconds.
Activate service
program:
Press the yellow selection button.
The current setting appears in the
blue display.
Change settings: Press the blue Plus/Minus buttons.
The setting change appears in the
blue display.
Save setting
change:
Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit service pro-
gram.
Press the yellow selection button
until only the number of the service
program appears in the yellow dis-
play.
23 Test program -> Description, see repair instructions.
24 Test program -> Description, see repair instructions.
25 Software ver-
sion
Display of the soft-
ware version of the
unit.
Display software
version:
Press the yellow selection button.
The three-digit software version
appears (first and second digit in the
yellow display, third digit in the blue
display).
Exit service pro-
gram:
Press the yellow selection button
until only the number of the service
program appears in the yellow dis-
play.
26 Test program -> Description, see repair instructions.
27 Activation
type
Setting of the AUTO
START activation, ON
or OFF.
Set activation
type:
Press the yellow selection button.
The current setting appears in the
top right display (AUTO ON or AUTO
OFF). The top right selection button
is used to switch between settings.
Save setting
change:
Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit service pro-
gram.
Press the yellow selection button
until only the number of the service
program appears in the yellow dis-
play.
No. Designation Description Use