13
/ 42
4
•
Service mode
801
16-
221
10.
15
CHAPTER 4
Service mode
General information
This unit has a service mode with two levels:
•
Level 1 = Setup (adjustment of settings that affect the operation of the
unit, e.g. display brightness)
•
Level 2 = Service (adjustment of settings that affect the operation of
the unit + service se test programs)
Setup overview
No.
Designation
Description
Use
1
Volume for
CUT activa-
tion
Volume setting of
the CUT activation
tones in 10 levels.
Activate setup:
Press the yellow selection button.
The current setting appears in the
blue display.
Change settings:
Press the blue Plus/Minus buttons.
The setting change appears in the
blue display.
Save setting change: Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit setup:
Press the yellow selection button
again. The settings display goes out
in the blue display.
Summary of Contents for VIO 100 C
