ELite 3, User Manual
Page 22/72
Next, you should connect the cleaning
tube kit to the reagent inputs, submerging
the free end in a bottle containing at least
100 ml of distilled water.
Cleaning tube kit connected
The analyzer will flush any remaining
reagents from the system into the waste
container.
As a next step, the analyzer asks you to
remove the cleaning tube kit. Leave Waste
connected.
When finished, the analyzer prompts you
to power off the system. Remove the
waste connector after shutting down.
2.3.4.
Handling in Emergency
In case of emergency situation - like instrument catching on fire (short-circuit, etc.) -
cut off power immediately by disconnecting mains power or DC input line, and use a
fire-extinguisher if necessary.