Page 8
Meaning
LED Indicator
Low Battery indication, please change the battery immediately.
Motion detected
Blink once
Motion sensor is performing a self-test
Blink once every
3 seconds
Blink continuously
This PIR sensor performs a 30s self-test after power on and then switches to working mode.
It sends out alarm signal to Hub when any human movement is detected and then back to
working state after 10s.
Note:
The sensor can move into a dormant state when it recognises people are in a room when
the alarm is set. In a dormant state, you will not see the light flash as often - this is a battery
saving solution - it does not interfere with operation or detecting an intruder
The Tamper Switch (small black button underneath the back bracket) will activate an alarm
condition if an unauthorised attempt is made to remove the Sensor cover.
The Motion Sensor is designed for use on interior walls and is set to Home Zone by default.
Whenever the Sensor detects movement (only while the alarm is armed) you will receive a
push alert notification showing the name of the Sensor that has been triggered and the
Internal Siren of Hub will sound immediately. The External Siren will also sound if there is
one installed and connected.
1.4. MOTION
SENSOR
Detection
Lens
Status
Indicator
Double-sided
tape stick place
Fixing
Bracket
Slot
Test
Button
Tamper Switch
Working Mode
Tamper
Switch