Page 16
Prompt Tone
This setting enables you to select your
preferred notification tone.
This setting enables you to add mailboxes
for a triggered alarm push notification to
your email account.
Accessory Settings
Add, delete, rename and change the Zone
Mode of each Sensor in this setting page.
Pairing a Siren
Tap on [+] at the top left on Accessory Settings Page or press the Pairing Button on the Hub
once, and then trigger the accessory. Repeat this for each accessory
Pairing new accessory
Notifications
Separate the transmitter
from the magnet by at
least 2cm.
Note:
Do not
use the tamper button on
the rear to pair with the hub
or you will pair the sensor in
24hr mode
Press any button on
the remote control
Note:
Do not use the remote control to arm the alarm during the learn process or you will pair
the siren to the remote control and not to the hub itself.
Note:
Swiping right on an accessory, then pressing the ‘Bin’ icon deletes that accessory
Make sure the siren is next to you when pairing. Press the learn
button on the siren and then press arm on your app to trigger the
hub and then disarm again. You Siren is now paired to the hub.