WARNING - DO NOT INSTALL
Avoid installing the Sensor pointing directly towards windows, or in, direct sunlight.
PIR Motion Sensor
Page 21
Step 2
: Secure the contacts with the double sided tape or
screw mounted plate provided. Make sure the triangle marks
on the side of tramsitter and magnet are close to each other
and within a range of 1cm. If the space between them is over
2cm, the LED on the transmitter will blink once.
LED blinks once
Triggers
When > 1cm
Step 1
: Choose a suitable location the Sensor can be
installed on door, windows or any other objects that can be
opened and closed. If it is applied to a metal door, please
place spacer under the transmitter and magnet.
Magnetic Door/Window Sensor
After closing the back cover of the hub and tightening the
screws, it can be placed on the table for use. For best reception
of the wireless signal, we recommended that you place the
panel in an open area that is located centrally within the
property close to a WiFi router. Avoid placing the hub on a
load-bearing wall or close to any electrical appliances.
Hub
6. INSTALLATION
Facing moving objects
Near air conditioning/
heat sources
Facing direct sunlight