Page 15
To install the Hub on the wall without triggering an alarm
condition, enable the tamper setting in the app.
Anti-Tamper
The Tamper Switch (small white button underneath the back cover) will activate an alarm
condition if an unauthorised attempt is made to remove the Hub from its installed location.
Note:
If the GSM indicator light flashes (once every second, it
means you may need to set your SIM card APN and enable the
GPRS Function. Input the associated APN, username, password
and tap ‘OK’ to save. The GSM indicator on panel will stop
flashing after the GPRS connection is successful, following
which you can operate the App via GPRS. The APN setting varies
in different countries. Please consult the local operator on how
to set the APN correctly.
Tamper Switch
GPRS Network
This setting enables you to control your system through GPRS data if a SIM card has been
insterted:
Jamming Detection
This system has a Jamming Detection Feature. If this feature
is enabled, the alarm will be triggered if the radio channel is
jammed continuously for more than 30 seconds or the system
is jammed for more than 3 periods of 10 seconds in a 5 minute
period. The built-in siren will sound rapid beeps as a pre-alarm
warning 10 seconds before a full alarm occurs. This function is
switched off as default.
Turn power switch
OF
F and then insert your own SIM card -
Turn Power to
ON
- When GSM indicator light flashes slowly
(once every 3 seconds) GPRS network has been connected