FS2003 ISP
Programmer - User Guide V1.07 – 1
st
September 2007
48
In Standalone Mode you can:
•
Select from 1 of up to 64 Independent Programming Projects using the keypad and display
•
Plug the Programmer ISP cable into a Target System
•
Program the selected Programming Project into the Target Device
•
Unplug the Programmer ISP Cable from the Target System
•
Plug the Programmer ISP Cable into the next Target System
•
Repeatedly program the same Programming Project once it is selected
To execute a Programming Project in Standalone Mode:
#
Action
Observation / comment
1
Connect the programmer to a spare PC COM
port
2
Apply power to the Programmer / Target
System
Æ
Programmer Target Vcc LED illuminates
3
Upload your ‘Programming Project(s)’ to the
programmer
See EQTools Manual – Project Upload Wizard
for full instructions.
4
Disconnect power from the Programmer /
Target System
5
Disconnect the serial lead from the
programmer
Æ
Programmer is no longer controlled from PC
6
Follow the instructions to program the Target
Device in Standalone Mode
