FS2003 ISP
Programmer - User Guide V1.07 – 1
st
September 2007
11
1.2 Hardware Overview (external layout)
Top Panel
ISP Cable Slot
ISP cable plugs into relevant ISP Header internally and
then exits the case through this slot.
Front Panel
<Target Vcc> LED
- Indicates when ‘Target Vcc’ is ON
- Does not indicate ‘Programmer
Power’ unless Jumper J9 is fitted.
Status LED’s:
<PASS> LED
<BUSY> LED
<FAIL> LED
<NO> Button
- Used to cancel a programming
operation.
<YES> Button
- Used to start an ‘autoprogram’
operation.
Bottom Panel
1. RS-232 port (J5)
2. External DC Power Supply Input (CON1)
