FS2003 ISP
Programmer - User Guide V1.07 – 1
st
September 2007
17
1.5 Device Support
1.5.1 Devices supported by the programmer
The programmer supports the following devices (at the time of this manual going to press):
#
Silicon
vendor
Family
Programming
algorithm
Device support
1 Atmel
AT89S
LV SPI
- AT89(L)S8252/53
- AT89(L)S51/52
(including ‘L’ versions)
- AT89S 2051 / 4051
- AT89S8253
S
2 Atmel
AT90S (AVR)
LV SPI
- AT90(L)S1200(A) / 2313 / 2333 / 4433 / 2323
/ 2343 / 4414 / 8515 / 4434 / 8535
(including ‘L’ versions)
S
3 Atmel
AT90CAN
LV SPI
AT90CAN128 / AT90CAN64 / AT90CAN32
S
4 Atmel
AT90CAN
JTAG (AVR)
AT90CAN128 / AT90CAN64 / AT90CAN32
U
5 Atmel
AT90USB
LV SPI
AT90USB1286/ AT90USB1287/
AT90USB162/ AT90USB646/ AT90USB647/
AT90USB82
S
6 Atmel
AT90USB
JTAG (AVR)
AT90USB1286, AT90USB1287,
AT90USB646, AT90USB647
U
7 Atmel
ATmega (AVR) LV SPI
- ATmega 8 / 16 / 32 / 48 / 88 / 64 / 103 / 128 /
1280 / 1281 / 168 / 169(V) / 169PV / 323 / 325
/ 329 / 2560 / 2561 2561V / 8515 / 8535
(including ‘L’ versions)
S
8 Atmel
ATmega
(AVR)
JTAG (AVR)
ATmega 8515 / 8535 / 32 / 64 / 128 / 1280 /
1281 / 161 / 162 / 163 / 169 / 323 / 325 / 329 /
3290(V) 406 / 640(V) / 2560 / 2561
(including ‘L’ versions)
U
9 Atmel
ATtiny (AVR)
LV SPI
ATtiny 12 / 13 / 15L / 22 / 24*/ 25 / 26 / 45 / 85
/ 2313
(including ‘L’ versions)
S
10 Atmel
ATtiny (AVR)
HV SPI (+12V
VPP)
ATtiny 11 / 12 / 15L
(including ‘L’ versions – Vcc must be +5V with
a +12V Vpp applied to the RESET pin)
HV ISP support for the ATtiny13, 25, 45 etc is
not currently available.
S
11 Atmel
(Temic)
T89C51Rx2 UART
Boot
Loader
T89C51 RB2 / RC2 / RD2
T89C51 IB2 / IC2
T89C51CC01
(Support for the AT89Cxxxx devices is not
currently available)
S
12 NXP
(Philips)
T89C51Rx2 UART
Boot
Loader
P89C51 RB2 / RC2 / RD2
P89C 660 / 662 / 664 / 668
S
13 Zensys
ZW series
LV SPI
ZW0102 / ZW0201 / ZW0301
S
