epur | USER’S MANUAL
www.epur.io - - | 66 | - - [email protected]
6.
Once machining is over, the machine repositions itself in its centre and the
spindle motor stops. Wait for everything, including the spindle, to stop
completely before intervening on the machine.
7.
At this stage, you have several options: either restart the same machining
process by pressing
RESTART
, access the history of machining operations to
choose to repeat one that has already been carried out by pressing
HISTORY
,
or (if you have just carried out a tenon- or male dovetail-type assembly)
carry out the complementary female assembly without any additional
configuration by pressing the
COMPLEMENTARY ASSEMBLY
function. You may also
choose to return to the main menu by pressing the
HOME
button, located at
the top left of the screen in the header banner.
MACHINING OVER
START AGAIN – HISTORY –
COMPLEMENTARY ASSEMBLY
#10 – Extraction unit
Your OAKBOT must be connected to an extraction unit, for which a 100-mm connecting
flue pipe is available on the lower part of the clamping system.
Summary of Contents for OAKBOT EOX 4.2 Series
