epur OAKBOT EOX 4.2 Series, User Manual

Page: 65 / 74

epur | USER’S MANUAL
www.epur.io - - | 65 | - - contact@epur.io
CAUTION
CAUTION
You’re going to start machining.
After validating, the machine will
start moving.
RESPECT ALL SAFETY RULES
START MACHINING
The programme asks you to validate machining start-up. If you wish to cancel,
press the cross situated at the top right of the window. Otherwise, if you are
sure you want to start machining, actuate the milling cutter and start the
machine moving, press START MACHINING.
CAUTION
#1 - MACHINE
You’re going to start machining.
After validating, the machine will
start moving.
RESPECT ALL SAFETY RULES
START MACHINING
3. The machine starts and the machining cycle begins. In case of emergency, you
can hit the emergency stop button located on the dedicated remote control at
any time.
4. In any situation which does not present any danger, you can halt machining
by pressing the STOP button, which definitively stops machining without any
possibility of resuming.
5. If the emergency stop button or the stop button is pressed, the machine will
request the point of origin. More machining operations may only be carried
out when going to the point of origin has been completed.