epur OAKBOT EOX 4.2 Series, User Manual

Page: 27 / 74

epur | USER’S MANUAL
www.epur.io - - | 27 | - - contact@epur.io
3. Read the precautions to be taken indicated by the interface, then maintain
pressure on the
"
Extract Motor
"
button to make the motor chuck accessible.
You may release the button at any time to stop the movement.
CAUTION
#1 – MACHINE
When pressing the
"
EXTRACT MOTOR
"
button, the machine will begin to move.
RESPECT THE SAFETY RULES.
You may release the button at any time
to stop the movement. To change the
cutter, stop the system and disconnect
the power supply.
SHUT DOWN SYSTEM EXTRACT MOTOR
Une fois le moteur en position souhaitée,
appuiyez sur « Arrêt système » pour eteindre le
système.
Once the motor is in the desired
position, press the "Shut down system"
button to switch the system off
.
CAUTION
#1 – MACHINE
When pressing the
"
EXTRACT MOTOR
"
button, the machine will begin to move.
RESPECT THE SAFETY RULES.
You may release the button at any time
to stop the movement. To change the
cutter, stop the system and disconnect
the power supply.
SHUT DOWN SYSTEM EXTRACT MOTOR
/!\ CAUTION /!\
For your own safety, when assembling or disassembling the tool, the machine should
be switched off and the cable disconnected from the mains power supply. When you
do this, check out its status and if there is much wear, do not use the machine
and contact the after-sales service.