epur OAKBOT EOX 4.2 Series, User Manual

Page: 28 / 74

epur | USER’S MANUAL
www.epur.io - - | 28 | - - contact@epur.io
4. At this point, your machine is going to switch off. Wait for the indicator
lights to go off and disconnect the power supply cable from the mains socket.
Press the machine’s
"
Stop
"
button ( red button ).
5. You can now carry out work on the machine. Use the 32-mm flat spanner to stop
the chuck from turning, and the spanner-wrench to unscrew the spindle nut.
6.
Without unscrewing the nut entirely, put the tool into the spindle’s collet
chuck,
checking that it has gone to the bottom of the chuck. If such is not the
case, this will lead to dimension errors on machining.
/!\ CAUTION /!\
Check that the diameter of the ER32 collet chuck corresponds correctly with the
diameter of the tool shank.
7. You can now retighten the spindle nut, using the
32 flat spanner and the spanner-wrench. Check
that the nut is sufficiently tight so that it is
properly kept in place.