Epson WF-R5690, User Manual

Page: 233 / 416

233
Setting Options Description
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. Select
All for phones lines that do not use this
service.
Single
Double
Triple
Double&Triple
Rings to Answer 1 to 9 Sets the number of rings before your product receives
a fax. If Receive Mode is set to
Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to answer a call.
Remote Receive Off Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to
Auto ). When you select On , you must also
set a Start Code . If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
On
Start Code
Parent topic: Selecting Advanced Fax Settings
Output Settings - Fax
Set the output options you want to use for incoming faxes.
Note: If you select Save to Inbox , faxes are saved in the product's memory. Delete faxes after viewing
or printing to prevent the memory from filling up. Even if you select other options for saving faxes, they
may be saved temporarily in the product's memory.