196
LCD screen message
Condition/solution
Maintenance rollers on XX are
nearing the end of their service life.
The maintenance rollers need to be replaced periodically for
optimal performance. (Paper may not feed correctly from the
paper cassette when the maintenance roller is near the end of its
service life.)
Maintenance rollers on XX are at the
end of their service life.
Contact your dealer to replace the maintenance rollers. Reset
the maintenance roller counter and select the paper cassette for
which you replaced the maintenance rollers.
You need to replace the following ink
cartridge(s).
Replace the ink cartridge indicated on the LCD screen.
Memory full
Reduce the size of the print job.
Invalid IP address and subnet mask.
There is a problem with the network connection to your product.
Recovery mode
An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help,
contact Epson for support.
Parent topic:
Solving Problems
Related references
Where to Get Help
Related tasks
Checking for Software Updates
Related topics
Replacing Ink Cartridges and Maintenance Boxes
Solving Paper Problems
Wi-Fi or Wired Networking
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1.
Disconnect any interface cables connected to your product.
2.
Load plain paper in the product.
3.
Press the arrow buttons to select
Menu
and press the
OK
button.
Summary of Contents for WF-8090
