5-52
Main Assembly 4 Paper Roll Receive Roller, J Paper Guide Roller, Power Switch
Assembly, Detection Adjustment Screw, and Paper Take-up Gear
Assembly Attachment
Assembly
Step
Assembly Procedure
Part Name
1
2
3
4
5
6
7
8
★
★
Paper roll receive roller
x 2
J paper guide roller
Power switch assembly
Spacer-N.E. detector
Detection adjustment screw
Paper take-up belt
Paper take-up gear assembly
Sub-assembly D
Shaft-Paper take-up gear
RE (2.3)
x 1
• Attach the Paper roll receive rollers to the Case-Main by pushing the
rollers into place.
• Attach the J paper guide roller to the U-grooves A on the Case-Main.
• Attach the Power switch assembly to the Case-Main.
• Attach the Spacer-N.E. detector to the Detection adjustment screw;
then insert and tighten the screw in the hole of the N.E. detector unit.
• Attach the Paper take-up belt to the pulley of the Paper take-up gear
assembly; then place the gear assembly in portion B of the Case-
Main.
• Insert the Shaft-Paper take-up gear through hole C into the Paper
take-up gear assembly; then secure the shaft with the E-ring.
<Adjustment>
• Adjust the N.E. detector position. Refer to
Adjustment A in Section
5.4.4.
<Checkpoint>
• Verify that the Paper roll receive rollers, J paper guide roller, and
Paper take-up gear turn smoothly.
CONFIDENTIAL
Summary of Contents for U375 - TM B/W Dot-matrix Printer
