Rev.B
Disassembly, Assembly, and Adjustment 5-35
TM-U200D/U200PD Technical Manual
2.
In case of Single-color Print Version, secure the grounding wires from the printer mechanism
assembly to the Plate, upper with the screw. Make sure that the grounding wires are lower than the
end of the Shaft, carriage guide.
3.
In case of 2-color Print Version, secure the Earth plates from the printer mechanism assembly with the
screws.
Main Assembly 7 (Case Unit)
Paper roll receive rollers , Case, upper , Roller, guide and Switch panel
1.
Apply G-31 to both of the Paper roll receive rollers.
2.
Attach the Paper roll receive rollers to the Case, lower.
3.
Attach the Case, upper to the Case, lower and secure it with the screws. Make sure not to catch the
grounding wires on the Case, upper.
4.
Attach the Roller, guide to the Case, upper.
Grounding wires
Shaft, carriage
guide
CP(0) (M3x6)
[0.59 to 0.78 N • m
(6 to 8 kgf • cm)]
CP(0) (M3x6)
[0.59 to 0.78 N • m
(6 to 8 kgf • cm)]
Grounding wire
Earth plate
(2-color Print Version)
(Single-color Print Version)
Summary of Contents for TM U200D - B/W Dot-matrix Printer
