5-8 Disassembly, Assembly, and Adjustment
Rev. B
Main Assembly 1
Lever, ribbon switch , Spring, ribbon release , Lever, ribbon release , Gear, ribbon intermediate
, Gear, ribbon transmission , Ribbon take-up ass’y , and Plate, ribbon drive ass’y
<1 to 3 are only for 2-color Print Version>
1.
Place the Lever, ribbon switch by fitting its hole onto dowel A of the Frame, base ass’y. While
rotating the Lever, ribbon switch, make sure that you do not catch the protection part to slip of the
Lever, ribbon.
2.
Hook the Spring, ribbon release to the notch of the Lever, ribbon switch an hook B of the Frame, base
ass’y.
3.
Fit the holes of the Lever, ribbon release to two shafts of the Frame, base assiy, then secure it with the
R.E.
✔
Check that the Lever, ribbon switch and Lever, ribbon release are attached in the proper directions.
Lever, ribbon switch
Notch
Lever, ribbon release
R.E(3)
(2-color Print Version)
Summary of Contents for TM U200D - B/W Dot-matrix Printer
