Rev. B Appendix A-1
TM-U200D/U200PD Technical Manual
Appendix
RS-485 Serial Interface
NOTES:
❏
The handshaking is set through the DIP switches on the TM series printers. The choices indicated in parentheses
above are typical choices or a typical range of choices that are supported by the TM series printers.
❏
DR1 > DR2 CS1 > CS2 indicates that:
Channel 1 is high.
Channel 2 is low.
❏
DR1 < DR2 CS1 < CS2 indicates that:
Channel 2 is high.
Channel 1 is low.
Signal levels and communication control functions
Data transmission:
Bit serial
Synchronization: Asynchronous
Handshaking:
Depend on the DIP switch settings
(DTR/DSR or XON/XOFF control )
Signal levels:
2.0 V to 5.0 V: Logic 1
0.0 V to 0.8 V: Logic 0
Baud rates: Depend on the settings of the TM series printers
(2400 to 19200)
Data word lengths: Depend on the settings of the TM series printers
(7 or 8 bits)
Parity settings: Depend on the settings of the TM series printers
(None, even, odd)
Stop bits: Depend on the settings of the TM series printers
(1 or more)
CS1 CS2 Function
H L Communication is available
L H Communication is not available
Summary of Contents for TM U200D - B/W Dot-matrix Printer
