Rev.B
Disassembly, Assembly, and Adjustment 5-21
TM-U200D/U200PD Technical Manual
4.
Apply O-10 to the Shaft, carriage of both sides of the Carriage sub-ass’y. Then move the carriage
right and left to distribute the oil on the shaft.
✔
Make sure that there is a space between the slanting edge of the FFC, print head and the Carriage sub-
ass’y slanting side, and between the FFC edge and portion A. If there is no space, the FFC, print head
may not be inserted into the Print head unit firmly. Remove the Print head unit and insert the FFC,
print head again.
Print head unit (2-color Print Version only)
1.
Attach the FPC, print head to the Print head unit.
CPP-tite (M3x10)
[0.49 to 0.69 N • m
(5 to 7 kgf • cm)]
Print head unit
Hooks
Print head
ground plate
Carriage sub-ass’y
O-10 apply
portions
Portion A
FFC, print head
(Single-color Print Version)
Print head unit
FFC, print head
There must be space
between these.
(Single-color Print Version)
Summary of Contents for TM U200D - B/W Dot-matrix Printer
