Epson TM U200D - B/W Dot-matrix Printer Technical Manual Download Page 111

Page: 111 / 169

Rev.B

Disassembly, Assembly, and Adjustment 5-15

TM-U200D/U200PD Technical Manual

Main Assembly 8

Shaft, carriage guide ass’y

Insert the Shaft, carriage guide through the Frame, base ass’y and Carriage sub-ass’y and lock it with
the R.E.

Main Assembly 9

Spring, belt tension ass’y

Hook the Spring, belt tension to the hooks of the Tension plate ass’y and Frame, paper feed ass’y.

Push the Motor, carriage ass’y in the direction of the arrow to make sure that the motor is properly
placed. Then attach the screw.

✔

Be careful not to move the Tension plate ass’y when securing the screw.

Shaft, carriage guide

Frame, base ass’y

R.E(2.3)

Carriage sub-ass’y

Motor, carriage ass’y

CCS-tite (M3x6)

Hook of Frame, paper feed
ass’y

Spring, belt tension

Hook of Tension plate
ass’y

(5 to 7 kgf •cm)]

[0.49 to 0.69 N • m

Summary of Contents for TM U200D - B/W Dot-matrix Printer










































































































































































Search results

Summary of Contents for TM U200D - B/W Dot-matrix Printer

Reviews:

Related manuals for TM U200D - B/W Dot-matrix Printer

Brands by name

Popular brands

Epson TM U200D - B/W Dot-matrix Printer, Technical Manual

Search results

Summary of Contents for TM U200D - B/W Dot-matrix Printer

Reviews:

Related manuals for TM U200D - B/W Dot-matrix Printer

Brands by name

Popular brands