Epson TM U200D - B/W Dot-matrix Printer Technical Manual Download Page 120

Page: 120 / 169

5-24 Disassembly, Assembly, and Adjustment

Rev. B

Main assembly 15

(*Main assembly 15 to 18 are the processes for the 2-color Print Version)

Fixing plate, cover, left and Fixing plate, cover, right (2-color Print Version)

Attach the dowel of the Fixing plate, cover, left to the hole of Frame, paper feed and secure it with the
screw.

Attach the dowel of Fixing plate, cover, right to the hole of Frame, paper feed and secure it with the
screw.

(2-color Print Version)

Fixing plate, cover, right

Fixing plate, cover, left

CCS-tite (M3x10)

[0.69 to 0.88 N • m

(7 to 9 kgf • cm)]

CCS-tite (M3x10)

[0.69 to 0.88 N • m

(7 to 9 kgf • cm)]

Summary of Contents for TM U200D - B/W Dot-matrix Printer










































































































































































Search results

Summary of Contents for TM U200D - B/W Dot-matrix Printer

Reviews:

Related manuals for TM U200D - B/W Dot-matrix Printer

Brands by name

Popular brands

Epson TM U200D - B/W Dot-matrix Printer, Technical Manual

Search results

Summary of Contents for TM U200D - B/W Dot-matrix Printer

Reviews:

Related manuals for TM U200D - B/W Dot-matrix Printer

Brands by name

Popular brands