Epson SURECOLOR SC-S30670 Operator'S Manual Download Page 50

Page: 50 / 56

Long-term Storage
(Pre-storage
Maintenance)

Always perform

Pre-Storage Maint.

if the printer will

not be used (and will be turned off) for the extended
periods shown in the following table. The standard
unused period when

Pre-Storage Maint.

is necessary

differs depending on the model and color mode being
used as shown in the following table.

For

Pre-Storage Maint.

, use the number of Cleaning

cartridges separately available shown in the following
table.

SC-S70600 series (10 Color mode)

Standard unused
period

Maintenance
colors

Cartri
dges

7 to 13 days

MS/WH

2 weeks or more

All Nozzles (all colors)

* If the storage interval is short, you can perform

Pre-Storage

Maint.

for spot color ink only.

SC-S70600 series (9 Color mode)

Standard unused
period

Maintenance
colors

Cartri
dges

7 to 13 days

2 weeks or more

All Nozzles (all colors
except for WH)

* If the storage interval is short, you can perform

Pre-Storage

Maint.

for spot color ink only.

SC-S70600 series (8 Color mode)

Standard unused
period

Maintenance
colors

Cartri
dges

2 weeks or more

All Nozzles (all colors)

SC-S50600 series (5C Mode)

Standard unused
period

Maintenance
colors

Cartri
dges

7 to 20 days

3 weeks or more

All Nozzles (all colors)

* If the storage interval is short, you can perform

Pre-Storage

Maint.

for spot color ink only.

SC-S50600 series (4C Mode)

Standard unused
period

Maintenance
colors

Cartri
dges

3 weeks or more

All Nozzles (all colors)

Important:

❏

If you do not perform

Pre-Storage Maint.

, the

print head could become permanently clogged.

❏

After performing

Pre-Storage Maint.

for spot

color ink only, you must charge spot color ink if
you want to change Pre-Storage Maint. to

All

Nozzles

Performing Pre-storage
Maintenance

Important:

If the amount of remaining ink or cleaning fluid is
insufficient, the function may not run. When there
is an insufficient amount remaining, have new
cartridges on hand as a precaution.

Buttons that are used in the following settings

After confirming that the printer is ready, press
the

button.

The Maintenance menu will be displayed.

Use the

buttons to select

Pre-Storage

Maint.

, and press the

button.

EPSON SC-S70600 series/SC-S50600 series Operator's Guide

Maintenance

Summary of Contents for SURECOLOR SC-S30670
























































Search results

Summary of Contents for SURECOLOR SC-S30670

Reviews:

Related manuals for SURECOLOR SC-S30670

Brands by name

Popular brands

Epson SURECOLOR SC-S30670, Operator'S Manual

Search results

Summary of Contents for SURECOLOR SC-S30670

Reviews:

Related manuals for SURECOLOR SC-S30670

Brands by name

Popular brands