I
To ensure the roll holder is inserted into the roll
core sufficiently, push it twice.
c
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly
during printing because of slippage between
the roll holder and roll core.
This may cause banding in the print results.
J
c
Important:
❏
If the roll holder screw is loose, the roll
holder may move during printing. This
could cause stripes and unevenness in the
print results.
❏
If the left or right edges of the roll are not
properly aligned, realign the edges.
K
Rotate the handle until part A in the illustration
below is fully inserted.
c
Important:
Once part A is hidden, do not turn the handle
any further. Failure to observe this precaution
could damage the roll holder.
If part A is still visible even after the handle
has been turned fully, rewind the handle.
Loosen the roll holder screw on the right side,
and then restart from Step 9.
EPSON SC-S70600 series/SC-S50600 series Operator's Guide
Basic Operations
10
