REQUIREMENTS, THAT THE OPERATION OF THE COVERED CODE WILL BE UNINTERRUPTED
OR ERROR-FREE, OR THAT DEFECTS IN THE COVERED CODE WILL BE CORRECTED. NO ORAL
OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE, AN APPLE AUTHORIZED
REPRESENTATIVE OR ANY CONTRIBUTOR SHALL CREATE A WARRANTY. You acknowledge that
the Covered Code is not intended for use in the operation of nuclear facilities, aircraft navigation,
communication systems, or air traffic control machines in which case the failure of the Covered Code
could lead to death, personal injury, or severe physical or environmental damage.
9. LIMITATION OF LIABILITY. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL
APPLE OR ANY CONTRIBUTOR BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATING TO THIS LICENSE OR YOUR USE
OR INABILITY TO USE THE COVERED CODE, OR ANY PORTION THEREOF, WHETHER UNDER A
THEORY OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCTS LIABILITY
OR OTHERWISE, EVEN IF APPLE OR SUCH CONTRIBUTOR HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL
PURPOSE OF ANY REMEDY. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF
LIABILITY OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT
APPLY TO YOU. In no event shall Apple's total liability to You for all damages (other than as may be
required by applicable law) under this License exceed the amount of fifty dollars ($50.00).
10. Trademarks. This License does not grant any rights to use the trademarks or trade names "Apple",
"Apple Computer", "Mac", "Mac OS", "QuickTime", "QuickTime Streaming Server" or any other
trademarks, service marks, logos or trade names belonging to Apple (collectively "Apple Marks") or to
any trademark, service mark, logo or trade name belonging to any Contributor. You agree not to use any
Apple Marks in or as part of the name of products derived from the Original Code or to endorse or
promote products derived from the Original Code other than as expressly permitted by and in strict
compliance at all times with Apple's third party trademark usage guidelines which are posted at
http://www.apple.com/legal/guidelinesfor3rdparties.html.
11. Ownership. Subject to the licenses granted under this License, each Contributor retains all rights,
title and interest in and to any Modifications made by such Contributor. Apple retains all rights, title and
interest in and to the Original Code and any Modifications made by or on behalf of Apple ("Apple
Modifications"), and such Apple Modifications will not be automatically subject to this License. Apple
may, at its sole discretion, choose to license such Apple Modifications under this License, or on different
terms from those contained in this License or may choose not to license them at all.
12. Termination.
12.1 Termination. This License and the rights granted hereunder will terminate:
(a) automatically without notice from Apple if You fail to comply with any term(s) of this License and fail
to cure such breach within 30 days of becoming aware of such breach;
(b) immediately in the event of the circumstances described in Section 13.5(b); or
203
Summary of Contents for SureColor F7200
