Epson SureColor F7200 User Manual Download Page 194

Page: 194 / 208

Parent topic:

Technical Specifications

Ink Pack Specifications

Sublimation transfer ink color

High Density Black, Cyan, Magenta, Yellow

Ink life

Do not use if the date on the package has expired

Print quality guarantee

25 days (from the day the ink tank was refilled from the ink pack)

Temperature

In transit (unopened): –4 to 140 °F (–20 to 60 °C)

1 month at 104 °F (40 °C)

8 hours at 140 °F (60 °C)

In storage (opened): 41 to 95 °F (5 to 35 °C); 59 to 77 °F (15 to 25
°C) recommended

Capacity

1000 ml

Parent topic:

Technical Specifications

Related references

Consumables and Replacement Parts

Media Specifications

Print quality is greatly affected by the type and quality of media used. Always test a sample of media
before purchasing large quantities or printing large jobs.

Note:

Do not use media that is wrinkled, scratched, torn, or dirty.

Roll core size

2 or 3 inches

Roll outer diameter

Up to 9.8 inches (250 mm)

Media width

12 to 64 inches (300 to 1626 mm)

Media thickness

Up to 0.04 inch (1 mm)

Roll weight

Up to 88.2 lb (40 kg)

Parent topic:

Technical Specifications

194

Summary of Contents for SureColor F7200

















































































































































































































Search results

Summary of Contents for SureColor F7200

Reviews:

Brands by name

Popular brands

Epson SureColor F7200, User Manual

Search results

Summary of Contents for SureColor F7200

Reviews:

Brands by name

Popular brands