Epson Stylus Pro GS6000, Setup And Use Manual

Page: 103 / 128

103
Solving Problems | 103
PAPER ERROR
LOAD PAPER PROPERLY
Printer cannot detect paper. Make sure the roll is cut evenly.
Release the paper lever and reload paper. See
page 43 for instructions.
PAPER JAM
REMOVE PAPER
Paper has jammed in the
printer. Release the paper lever and remove the
jammed paper. Turn the printer off and then
back on; see page 107 for more information.
PAPER OUT
LOAD PAPER
Paper ran out or has not
ejected properly. Release the paper lever and load paper again.
See page 43 for instructions.
PAPER SKEW
LOAD PAPER PROPERLY
Paper is not loaded straight. Release the lever and load the paper correctly.
Then return the lever to the
Secured position.
PRINTER ERROR
RESTART THE PRINTER
You tried to print while an error
condition was present. Press the
P
Power button to turn off the
printer. Unplug the printer and wait 30 seconds.
Then plug it in and turn it back on.
SERVICE CALL ERROR If the error code is 1133 or
1137, the print head is locked. Remove the bracket securing the print head;
see page 27.
If the error code is 3000, a
power cord is not plugged into
the printer properly. Press the
P
Power button to turn off the
printer. Unplug the printer and wait 30 seconds.
Then plug it in securely and turn it back on. If
the message remains, contact Epson as
described on page 11.
An error has occurred. Note the error number, then turn the printer
off. Unplug the printer and wait 30 seconds.
Then plug it in and turn it back on. If the
message remains, contact Epson as described
on page 11.
Message Explanation Response