Epson Stylus Pro GS6000, Setup And Use Manual

Page: 89 / 128

89
89
The Epson Stylus Pro GS6000 requires periodic cleaning. You may also
need to prepare the printer for storage, moving, or transportation.
•
Cleaning the printer
•
Storing the printer
•
Moving or transporting the printer
Cleaning the Printer
To keep your printer working at its best, clean it if it becomes dirty.
1. Remove any loaded media from the printer (see page 66).
2. Turn off the printer and wait for all of its lights to turn off.
3. Unplug the power cord and disconnect the printer from your system.
4. Wait one minute, then open the front cover.
Chapter 4:
Cleaning,
Storing, and
Transporting
the Printer
Caution: Be careful not to
touch the gears inside the
printer.
To avoid damaging the
components as well as
the case, never use
alcohol or thinners to
clean the printer.
Be careful not to get
water on the printer
mechanism or electronic
components.
Don’t use a hard or
abrasive brush.
Don’t spray the inside of
the printer with lubricants;
unsuitable oils can
damage the mechanism.
Contact Epson if you think
the printer needs
lubrication.