Otherwise, it depends on the setting value of the
Top
Margin
in the menu.
Top Margin
setting
U
The initial default values are 3 mm/15 mm.
c
Important:
❏
Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure
the trailing edge does not come inside the
printing area.
❏
Even if the margins change, the printed size
does not change.
Premium Glossy Photo Paper (250)/Premium
Semigloss Photo Paper (250)/Premium Luster Photo
Paper (260)/Premium Semimatte Photo Paper (260)
Also, when printing the following paper in
CAD/Line
Drawing
mode, the values for
A
and
C
are 3 mm.
Singleweight Matte Paper
Cut Sheets Printable Area
When printing borderless on the left and right, the left
and right margins are 0 mm. (Borderless printing is
not available with poster board.)
The arrow in the illustration indicates the direction
that the paper is ejected.
Turning Off the Power
Using Power Off Timer
The printer offers the following two power
management options.
❏
Sleep mode
The printer enters sleep mode when there are no
errors, no print jobs being received, and no
control panel or other operations performed.
When the printer enters sleep mode, the control
panel's screen turns off and the internal motors
and other parts switch off to consume less power.
Sleep mode is cleared if a print job is received or a
button on the control panel is pressed.
You can set the time before entering sleep mode
by selecting from 1 to 120 minutes. At default
settings, the printer enters sleep mode if no
operations are performed for 15 minutes. The
time before entering sleep mode can be changed
in the General Settings menu.
U
“General Settings” on page 132
Note:
When the printer enters sleep mode, the control
panel's screen goes blank as if the power has been
turned off, but the
P
light remains on.
❏
Power Off Timer
The printer is equipped with a Power Off Timer
option that automatically turns the printer off if
no errors occur, no print jobs are received, and no
control panel or other operations are performed
for a set period of time. You can set the time until
the printer automatically turns off from 30
minutes to 12 hours.
The factory default setting is
Off
. You can
perform
Power Off Timer
from the
General
Settings
menu.
U
“General Settings” on page 132
About Power Management
You can adjust the time before Power Management is
applied. Any increase will affect the printer’s energy
efficiency. Please consider the environment before
making any changes.
SC-P8500D Series/SC-T7700D Series User's Guide
Basic Operations
71
