Epson SC-P8500D Series User Manual Download

Page: 151 / 210

Place the used Maintenance Box in the clear
bag included.

Important:

Do not tilt the Maintenance Box until the
bag's press seal has been firmly closed.
Failure to observe this precaution could
cause ink to leak.

Carefully insert the new Maintenance Box.

Close the maintenance box cover.

Replacing the Borderless
Maintenance Box

Follow the steps below to replace the Borderless
Maintenance Box (maintenance box for borderless
printing).

Important:

Do not replace the Borderless Maintenance Box
while printing.
Failure to observe this precaution could cause ink
to leak.

Prepare a new Borderless Maintenance Box and
the clear bag included.

Important:

Do not touch the IC chip on the Borderless
Maintenance Box.
Doing so may prevent normal operation and
printing.

SC-P8500D Series/SC-T7700D Series User's Guide

Maintenance

151

Summary of Contents for SC-P8500D Series



















































































































































































































Search results

Summary of Contents for SC-P8500D Series

Reviews:

Related manuals for SC-P8500D Series

Brands by name

Popular brands

Epson SC-P8500D Series, User Manual

Search results

Summary of Contents for SC-P8500D Series

Reviews:

Related manuals for SC-P8500D Series

Brands by name

Popular brands