C
Select
Menu
-
Paper Setting
-
Adjustments
-
Ruled Line Alignment
from
the control panel.
D
Select the ruled line alignment that best suits
your needs and intended usage.
E
If you select manual adjustment, follow the
on-screen instructions to make adjustments.
Replacing Consumables
Replacing Ink Cartridges
If one of the installed ink supply units is expended,
printing cannot be performed.
If an ink cartridge remaining amount falls below the
minimum amount, you can continue printing after
replacing the ink cartridge.
If the remaining ink amount drops yet printing is
continued, then replacement of an ink cartridge
during printing may be required. If you replace it
while printing, colors may look different depending
on how the ink dries. When this is not permissible, we
recommend first replacing the ink cartridge with a
new one before printing. The removed ink cartridge
can be installed again and used until the remaining
amount falls below the minimum amount.
Supported ink cartridges
U
“Options and Consumable Products” on
Replacing Ink Cartridges
You can use the same procedure to replace all ink
cartridges.
c
Important:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson’s warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may
not be displayed, and use of non-genuine ink is
recorded for possible use in service support.
SC-P8500D Series/SC-T7700D Series User's Guide
Maintenance
148
