Epson SC-F3000 Series User Manual Download Page 99

Page: 99 / 154

Attach the new air filter.

Insert the two hooks at the end of the filter into
the holes in the printer, and then press down
until you hear the tab click into place.

Confirm that the Air Filters are correctly
installed.

Close the right side of the printer cover.

Open the left side of the Printer Cover, and then
replace the remaining 2 air filters using the same
procedure as for the right side.

Do steps 3 to 5.

Close the left side of the Printer Cover, and then
press

Done

on the control panel screen.

Put the old air filters into the bags of the new air
filters.

Disposing of Used Consumables

“Disposal” on

page 105

SC-F3000 Series User's Guide

Maintenance

Summary of Contents for SC-F3000 Series



























































































































































Search results

Summary of Contents for SC-F3000 Series

Reviews:

Related manuals for SC-F3000 Series

Brands by name

Popular brands

Epson SC-F3000 Series, User Manual

Search results

Summary of Contents for SC-F3000 Series

Reviews:

Related manuals for SC-F3000 Series

Brands by name

Popular brands