Epson SC-F3000 Series User Manual Download Page 53

Page: 53 / 154

Enlarging and reducing

After you have finished the settings, send the job to the
printer.

Sending and printing jobs

Specify the number of prints on the bottom of the
settings area, and then click the

Print

button.

When the printer has finished receiving a job, the
preview display opens on the printer’s screen and
the

button lights.

See the following, and load a T-shirt (media) and
start printing.

“Load the T-shirt (media)” on page 59

Notes on Receiving Jobs

Only the following operations are possible while is
receiving jobs. If buttons do not respond when
operating the control panel, the printer may be
receiving a job; wait for a while and then try again.

❏

Canceling a job

❏

Moving the movable base (platen)

❏

Turning off the power

Note:

❏

After canceling a job, it takes a while before the
printer is ready to print again.

❏

It takes a while to turn off the printer after
performing the power off operation. Also, jobs that
have been received are deleted.

SC-F3000 Series User's Guide

Basic Printing

Summary of Contents for SC-F3000 Series



























































































































































Search results

Summary of Contents for SC-F3000 Series

Reviews:

Related manuals for SC-F3000 Series

Brands by name

Popular brands

Epson SC-F3000 Series, User Manual

Search results

Summary of Contents for SC-F3000 Series

Reviews:

Related manuals for SC-F3000 Series

Brands by name

Popular brands