Your hands may be soiled by waste ink. If necessary,
wear the gloves included in the maintenance kit
supplied.
U
“Options and Consumable Products” on page 133
A
Check that the power is off.
B
Remove the waste ink bottle.
U
“Replacing the waste ink bottle” on page 92
C
Disconnect all the wires, such as the power cable
and connecting cables, from the printer and Ink
Unit.
D
Remove the platen.
U
“Replacing platens” on page 56
E
Close the fixing lever of the Platen Gap Lever.
U
“How to change the platen position” on
F
Remove the Overturn-Prevention Plate from the
Ink Unit.
G
Release all the locks on the casters of the ink unit
and stand.
There are 2 casters each on the front and back of
both the stand and ink unit.
H
Raise all the adjustable feet so they are higher
than the casters.
There are 2 adjustable feet each on the front and
back of the stand.
c
Important:
Be sure to raise all the adjustable feet before
moving the printer. Moving the printer
without raising the adjustable feet could cause
a malfunction.
You need to use the provided wrench to loosen
the adjustable feet.
(1) Loosen the middle nut on the adjustable foot
until it touches the bottom nut.
(2) Turn the nut on the bottom counter-clockwise
until the adjustable foot is higher than the
caster.
SC-F3000 Series User's Guide
Appendix
138
