Epson S5U1C63000A User Manual Download Page 62

Page: 62 / 346

CHAPTER 4: ASSEMBLER

EPSON

S5U1C63000A MANUAL

(S1C63 FAMILY ASSEMBLER PACKAGE)

4.2.2 Output Files

Object file

File format: Binary file in relocatable IEEE-695 format

File name: <file name>.o (The <file name> is the same as that of the input file, unless otherwise

specified with the -o option.)

Output destination: Current directory

Description: File in which machine language codes are stored in a relocatable form available for

the linker to link with other modules and to generate an executable absolute object.

Relocatable list file

File format: Text file

File name: <file name>.lst (The <file name> is the same as that of the input file, unless other-

wise specified with the -o option.)

Output destination: Current directory

Description: File in which offset locations, machine language codes and source codes are stored

in plain text.

Preprocessed file

File format: Text file

File name: <file name>.ms (The <file name> is the same as that of the input file, unless other-

wise specified with the -o option.)

Output destination: Current directory

Description: File in which instructions for preprocessing (e.g. conditional assembly and macro

instructions) are expanded into an assembling format.

Error file

File format: Text file

File name: <file name>.err (The <file name> is the same as that of the input file, unless other-

wise specified with the -o option.)

Output destination: Current directory

Description: The file is created if the -e option is specified. It records error messages and other

information which the assembler delivers via the Standard Output (stdout).

Summary of Contents for S5U1C63000A



























































































































































































































































































































































Search results

Summary of Contents for S5U1C63000A

Reviews:

Related manuals for S5U1C63000A

Brands by name

Popular brands

Epson S5U1C63000A, User Manual

Search results

Summary of Contents for S5U1C63000A

Reviews:

Related manuals for S5U1C63000A

Brands by name

Popular brands