Epson S5U1C63000A, User Manual

Page: 258 / 346

CHAPTER 9: FUNCTION OPTION GENERATOR
244
EPSON
S5U1C63000A MANUAL
(S1C63 FAMILY ASSEMBLER PACKAGE)
9.3.4 Operation Procedure
The following shows the basic operation procedure.
(1) Loading the device information definition file
First, select a device information definition file (s1c63xxx.ini) and load it.
Select [Device INI Select] from the [Tool] menu or click the [Device INI Select] button.
[Device INI Select] button
The dialog box shown below appears. Enter a file name including the path in the text box or select a
file by clicking the [Ref] button.
Click [OK], and the file is loaded. If the
specified file exists and there is no problem
with its contents, the option list and the
function option document, which have both
been set by default, are displayed in each
area.
To stop loading the file, click [Cancel].
Once a device information definition file is selected, the same file is automatically loaded the next
time you start winfog.
Note: When you load a device information definition file after setting up options, all settings are reset to
the default state.
(2) Setup
Select [Setup] from the [Tool] menu or click the [Setup] button to bring up the [Setup] dialog box.
From this dialog box, select items and enter data.
[Setup] button
Date
Displays the current date. Change it as
necessary.
Function Option Document file
Specify the function option document file
name you want to create. The file name
displayed by default can be modified. You
can use the [Ref] button to look at other
folders.
Function Option HEX
Do you make hex file?
Select whether to create a function option
HEX file. You need to create one when you
use the ICE to debug programs.
Function Option HEX file
When you create a function option HEX file,
specify its file name here. The file name
displayed by default can be modified. You
can use the [Ref] button to look at other
folders.