manualshive.com logo in svg

Epson S5U1C63000A, User Manual

The Epson S5U1C63000A User Manual is a comprehensive guide that allows users to fully understand and utilize the features of this exceptional product. With step-by-step instructions and detailed illustrations, this manual is available for free download from our website so you can easily access it and make the most of your device.

Share
Download
background image

CHAPTER 9: FUNCTION OPTION GENERATOR

240

EPSON

S5U1C63000A MANUAL

(S1C63 FAMILY ASSEMBLER PACKAGE)

CHAPTER

 9 F

UNCTION

 O

PTION

 G

ENERATOR

9.1 Outline of the Function Option Generator winfog

The S1C63 chip allows several hardware specifications such as I/O port functions to be selected as mask
options. This helps you to configure the hardware of your product by changing the S1C63 chip's mask
patterns according to its specifications.
The Function Option Generator winfog is the software tool for creating the files necessary to generate
mask patterns. Its graphical user interface (GUI) ensures easy selection mask options. From the files
created by winfog, Seiko Epson produces the mask patterns for the S1C63 chip.
In addition, simultaneously with this file, winfog can create mask option setup files (Motorola S2 format
data) that are required when debugging programs with the ICE. When using the ICE to debug a program,
you can download this file from the host computer, making it possible to materialize optional functions
on the ICE that are equivalent to those on the actual IC.

9.2 Input/output Files

Figure 9.2.1 shows the input/output files of winfog.

Selection of 
mask options

winfog

Function option

HEX file

Function option

document file

Device information
definition file

To ICE

by debugger

Mask data creation

by mask data checker

s1c63xxx.ini

zzzzzzzz.fsa

zzzzzzzz.fdc

Fig. 9.2.1  Input/Output Files of winfog

Device information definition file (s1c63xxx.ini)

This file contains option lists for various types of microcomputers and other information. Always be
sure to use the files presented by Seiko Epson. This file is effective for only the type of microcomputer
indicated by the file name. Do not modify the contents of the file or use the file in other types of
microcomputers.

Function option document file (zzzzzzzz.fdc)

This is a text format file in which the contents of selected mask options are stored. You can read this
file into winfog and correct the already selected option settings. This file is packed along with com-
pleted other program/data files into a single file by the mask data checker winmdc, which we would
like to have presented to Seiko Epson as the mask data file. From this file, Seiko Epson will create the
mask patterns for the IC.

Function option HEX file (zzzzzzzz.fsa)

This is the Motorola S2 format file necessary to set the selected mask options in the ICE. When you
debug programs with the ICE, download this file into the ICE using debugger commands.

∗

1 The "xxx" in the file name denotes the model name of a microcomputer. For the "zzzzzzzz" part, any

given file name can be specified.

∗

2 For details on how to download mask options into the ICE, refer to Chapter 8, "Debugger".

Summary of Contents for S5U1C63000A



























































































































































































































































































































































Reviews:

No comments

Related manuals for S5U1C63000A

dbx ProVocal Specifications preview
ProVocal
Brand: dbx Pages: 2
Paradox ZX32D Manual preview
ZX32D
Brand: Paradox Pages: 4
Observint NVR4 Firmware User Manual preview
NVR4
Brand: Observint Pages: 117
Salto Node Installation Manual preview
Node
Brand: Salto Pages: 2
Accuphase AD-60 Instruction Manual preview
AD-60
Brand: Accuphase Pages: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Brand: ADTRAN Pages: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Brand: Acrosser Technology Pages: 4
IAR SYSTEMS IAR KickStart Kit TWR-K60N512-IAR Getting Started Manual preview
IAR KickStart Kit TWR-K60N512-IAR
Brand: IAR SYSTEMS Pages: 8
Juniper NFX250 Quick Start Manual preview
NFX250
Brand: Juniper Pages: 7
EVOC 6336-STG-YX Manual preview
6336-STG-YX
Brand: EVOC Pages: 57
Kontron 50099 067 User Manual preview
50099 067
Brand: Kontron Pages: 42
Tandy 26-3814 Operation Manual preview
26-3814
Brand: Tandy Pages: 24
Uniflair PCOWeb Instruction Manual preview
PCOWeb
Brand: Uniflair Pages: 24
National Instruments SC-2040 User Manual preview
SC-2040
Brand: National Instruments Pages: 56
Waveshare High-Precision AD/DA Board User Manual preview
High-Precision AD/DA Board
Brand: Waveshare Pages: 8
ETAS ES1337.2 User Manual preview
ES1337.2
Brand: ETAS Pages: 29
Uctronics U6180 Instruction Manual preview
U6180
Brand: Uctronics Pages: 2
Comelit IPNVR016A User Manual preview
IPNVR016A
Brand: Comelit Pages: 140

Brands by name

Popular brands

Load more brands