Epson Runsense SF-110 User Manual Download Page 28

Page: 28 / 104

GPS positioning

This device receives a signal from various satellites, and
identifies your position to use for measurement.

Important:

While identifying a GPS, make sure you are
outside with no obstructions overhead, and try to
keep the device as still as possible.

Operation buttons

Go to a location outside with no
obstructions overhead.

Display the

Menu

Press

on the time screen.

Select

Measurement

Press

to select, and then press

to set.

GPS positioning starts.

When GPS positioning is complete, the
positioning complete screen flashes, and then the
measurement screen is displayed.

Note:

It usually takes less than two minutes to complete
GPS positioning.

If it takes more than two minutes and

Failed

displayed, we recommend selecting

Cancel

moving to a different location, and trying again.

When the measurement screen is displayed, you can
start measuring.

“Measure” on page 33

Skipping GPS positioning

If you want to start measuring immediately, or if GPS
positioning is taking too long, select

Skip

during GPS

positioning and start measuring.

User Manual

Preparing and Basic Operations

Summary of Contents for Runsense SF-110








































































































Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands

Epson Runsense SF-110, User Manual

Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands