Epson Runsense SF-110 User Manual Download Page 35

Page: 35 / 104

Measuring

Operation buttons

Display the

Menu

Press

on the time screen.

Select

Measurement

Use

to select, and then press

GPS positioning starts, and the measurement
screen is displayed once positioning is complete.

Start measuring.

Press

Record the lap.

Press

while measuring.

The Lap Hold Screen* is displayed for 5 seconds,
and then the measurement screen is displayed.

“Lap Hold Screen” on page 37

* The screen display differs depending on the
settings.

“Screen pattern table” on page 78

Stop measuring.

Press

while measuring.

Press

to resume measuring.

Save the measurement result.

Press

while measurement is being paused to

display the

Measurement menu

, and then select

Complete measurement.

The data that has been measured is stored in the
main memory and can be checked in the History
screen.

“Checking Measurement Data” on

page 44

User Manual

Measure

Summary of Contents for Runsense SF-110








































































































Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands

Epson Runsense SF-110, User Manual

Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands