Epson Runsense SF-110 User Manual Download Page 14

Page: 14 / 104

Note:

❏

When you leave the device for a while, it enters sleep status and the time display turns off. This is not a malfunction as
the display is restored the next time a button is pressed or you move the device. You can also turn off the sleep function.

“Sys. Settings” on page 75

❏

The time screen is displayed if no operations are made for a specified length of time. The time varies depending on the
screen displayed.

Sys. Settings

User Settings

/Recall screen: 3 mins.

Measurement Screen (while not measuring): 60 mins.

❏

When three minutes have passed without any operations being performed on the

Measure set.

menu screen, the

measurement screen is displayed.

User Manual

Preparing and Basic Operations

Summary of Contents for Runsense SF-110








































































































Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands

Epson Runsense SF-110, User Manual

Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands