Epson Runsense SF-110 User Manual Download Page 75

Page: 75 / 104

Sys. Settings

Make settings for the device's system.

The value in brackets () is the default setting.

Setting items

Value

Explanation

Language

English (default)

Set the display language.

Deutsch

Time

Clock

12 Hour
(default)

Set the format for the display time.

24 Hour

DST

Set Daylight Saving Time.

OFF (default)

Time Adjust

The device receives a signal from the GPS and
automatically sets the time.

Signals from the GPS cannot be received while indoors.
Make sure the screen is facing up and you are outside
with no obstructions overhead.

If GPS positioning has not completed after two
minutes, we recommend selecting

Cancel

, moving to a

different location, and trying again.

Time Zone

Auto (default)

Sets the time zone for your location.

When

Auto

is selected, perform

Time Adjust

to set the

time zone automatically.

When

Manual

is selected, you can set the time zone

within a range of -12:00 to +14:00.

Manual

User Manual

Settings

Summary of Contents for Runsense SF-110








































































































Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands

Epson Runsense SF-110, User Manual

Search results

Summary of Contents for Runsense SF-110

Reviews:

Related manuals for Runsense SF-110

Brands by name

Popular brands