manualshive.com logo in svg

Epson R200 - Stylus Photo Color Inkjet Printer, Service Manual

The Epson R200 - Stylus Photo Color Inkjet Printer is an efficient and high-quality printer that delivers vibrant and professional photos. To ensure smooth operation and optimal performance, make use of the Service Manual available for free download from our website. Get the most out of your printer with this comprehensive manual.

Share
Download
background image

EPSON Stylus Photo R200/R210

Revision A

ADJUSTMENT

Adjustment Items and Overview

73

3.1  Adjustment Items and Overview

This chapter describes adjustments to be made after the disassembly/reassembly of this product.

3.1.1  Servicing Adjustment Item List

The adjustment items of this product are as follows. For details of the adjustment items, refer to the detailed procedures and sketches of the adjustment items.

Table 3-1. Adjustment Items

Function Item

Purpose

Method Outline

Tool

Used Media

Ad

ju

st

m

en

t ite

m

s

Market Setting

At the time of Main Board replacement, this adjustment is made 
to write the board common information on a destination basis.

Select and execute this function in the exclusive servicing program to 
save the following data into the EEPROM.

Market ID, CSIC Printer ID, D4 Setting (USB, Parallel), First Dot 
Adjustment fixed value.

Exclusive 
servicing 
program

Non-target

USB ID Input

This adjustment is made to allow the PC to recognize the 
connected printers individually when multiple printers of the 
same model are connected and used with the PC via a USB hub.

Select this function in the exclusive servicing program and enter the 
serial numbers of the printers. The correction value is saved to the 
specific EEPROM address on the Main Board.

Exclusive 
servicing 
program

Non-target

Head ID Input

At the time of Print Head replacement, this adjustment is made 
to correct head manufacturing variations and eliminate the 
individual differences of print quality.

Enter the ID of the Head QR code label applied to the Print Head into 
the exclusive servicing program to save it to the EEPROM on the 
Main Board. (Supplement: Read the QR code label from left to right 
on the top row and from top to bottom in due order.)

Exclusive 
servicing 
program

Non-target

Head Angular 
Adjustment

This adjustment is made to correct the error in the Print Head 
mounting position (angle of the Print Head to the paper surface) 
to keep the nozzle intervals uniform in the CR main scanning 
direction.

Select this function in the exclusive servicing program and print the 
adjustment pattern. Check the displacement amount of the pattern. 
Print the exclusive pattern again and adjust the displacement amount.

Exclusive 
servicing 
program

Photo 

Quality Ink 

Jet Paper 

(A4)

Bi-D Adjustment

This adjustment is made to correct the print timing in the go and 
return paths in bi-directional printing.

(This printer carries out printing with PG (typ.) and PG (-))

Select this function in the exclusive servicing program and print the 
adjustment patterns to check the displacement amounts of the patterns. 
Select/enter the pattern number that has the smallest displacement 
amount in the program. Print the exclusive patterns again and adjust 
the displacement amount. The correction value is saved into the 
EEPROM.

Exclusive 
servicing 
program

Plain paper 

(A4)

PW Sensor 
Adjustment

This adjustment is made to correct the mounting position of the 
PW Sensor on a software basis to minimize the paper detection 
error caused by the variations of the mounting position.

Select this function in the exclusive servicing program and print the 
adjustment patterns. Select the pattern number 5mm away from each 
edge, and enter that number in the program. The correction value is 
saved to the specific EEPROM address on the Main Board.   

Exclusive 
servicing 
program

Photo Paper / 
Glossy Photo 

Paper (A4)

Summary of Contents for R200 - Stylus Photo Color Inkjet Printer






































































































Reviews:

No comments

Related manuals for R200 - Stylus Photo Color Inkjet Printer

Idis FM1400 Installation Manual preview
FM1400
Brand: Idis Pages: 2
Xerox 3270 Programmer'S Manual preview
3270
Brand: Xerox Pages: 34
YEAZ TWEAK-X Instruction Manual preview
TWEAK-X
Brand: YEAZ Pages: 60
AAMP of America iSimple Operation Manual preview
iSimple
Brand: AAMP of America Pages: 6
Fargo Persona C25 Printer Selection Manual preview
Persona C25
Brand: Fargo Pages: 6
Fargo DTC4500e User Manual preview
DTC4500e
Brand: Fargo Pages: 90
Fargo DTC1000 User Manual preview
DTC1000
Brand: Fargo Pages: 126
FARGO electronics FARGO DTC 400 User Manual preview
FARGO DTC 400
Brand: FARGO electronics Pages: 278
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Oce CS9360 Installation Manual preview
CS9360
Brand: Oce Pages: 12
PASCO PS-3201 Reference Manual preview
PS-3201
Brand: PASCO Pages: 8
quadient IS-240 Replacement Manual preview
IS-240
Brand: quadient Pages: 2
QSC AcousticDesign AD-S52 Install Manual preview
AcousticDesign AD-S52
Brand: QSC Pages: 4
X10 FireCracker CK17A Owner'S Manual preview
FireCracker CK17A
Brand: X10 Pages: 1
Waycon UFP Series Installation Manual preview
UFP Series
Brand: Waycon Pages: 8
Wavetronix SmartSensor V Quick Start Manual preview
SmartSensor V
Brand: Wavetronix Pages: 4
X10 LM15A Installation And Operating Instructions preview
LM15A
Brand: X10 Pages: 2

Brands by name

Popular brands

Load more brands