Epson R200 - Stylus Photo Color Inkjet Printer, Service Manual

Page: 50 / 101

EPSON Stylus Photo R200/R210 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 50
2.3.10 Paper Guide, Upper removal
o
External View
Figure 2-20. "Paper Guide, Upper" removal
o
Parts/Units which should be removed before removing "Paper Guide,
Upper"
Paper Support Assy./Housing (left/right)/Housing (frame)/ASF Unit/Board, Main/
Holder, Shaft Unit
o
Disassembly Procedure
1. Move "Carriage Unit" to the home position.
2. Put a transparency between "Paper Guide, Upper" and "Roller PF Unit".
3. Release "Torsion Spring, 122.2" (x3) from the hook ( : 1 each) of "Frame,
Main", then pull it out to the front.
4. Release the hooks ( : 2 each) for securing "Paper Guide, Upper" (x3) to
upward. Then, release the dowels (2 each) while slightly holding up "Paper
Guide, Upper".
5. Press down "Paper Guide, Lower" and pull out "Paper Guide, Upper" (x3) to
the front while stepping it aside the ribs (2 each) of "Frame, Main"
Transparency Roller PF Assy.
Paper Guide, Upper
Torsion Spring, 122.2
Paper Guide, Lower
Hook
1
2
Hooks
Dowels
Rib Rib
o
When reinstalling "Paper Guide, Upper",
n
There are 2 types of "Driven Rollers" of "Paper Guide,
Upper". Install them as shown in the following figure.
Figure 2-21. Installation Position of "Paper Guide, Upper"
1
2
Driven Roller (Grey) Driven Roller (White)