Maintenance 9. Cable Unit
S5 Rev.5
169
(6) Secure the wire tie as shown in the picture.
(7) Mount the saddle to the supporting plate.
GT-SA bolt
: M4×10
Tightening torque : 2.8 N·m (0.29 kgf·m)
(8) Secure the cables to the supporting plate as shown in the picture.
(9) Loosely secure the cables in the Arm #3 with a wire
tie.
(10) Secure the supporting plate to the Arm #3.
GT-SA bolt
: 2-M4×10
Tightening torque : 2.8 N·m (0.29 kgf·m)
(11) Mount the saddle to the spring (some winds from the end) of the lead line.
Summary of Contents for ProSix S5 Series
