Epson Pro L12000QNL Page 249 User Manual Download

Page: 249 / 299

249

On/Standby
(power) light

Status
light

Laser
light

Temp light

Filter
light

Status and solution

Off

Flashing
blue

Flashing
orange

Off

Shutter error. Turn off the projector,
unplug the power cord, and contact
Epson for help.

Flashing blue

Varies

Flashing
orange

Varies

High temperature warning. If the
temperature gets too high, projection
will automatically stop.

• Make sure that the vents and air

filter are not clogged with dust or
obstructed by nearby objects.

• Make sure the environmental

temperature is not too hot.

• Clean or replace the air filter.

Varies

Flashing
orange

Air filter notice. Clean the air filter.

Flashing blue

Varies

Flashing
orange

Varies

Laser warning. Turn off the projector,
unplug the power cord, and contact
Epson for help.

Flashing blue

Varies

Flashing
orange

Varies

Lens warning. An unsupported lens
is attached. Attach only a supported
lens.

Flashing blue

Varies

Flashing
orange

Varies

Shutter warning. Turn off the
projector, unplug the power cord, and
contact Epson for help.

Flashing blue

Varies

Orange

Low air flow through the air filter.

• Make sure that the vents and air

filter are not clogged with dust or
obstructed by nearby objects.

• Clean or replace the air filter.

• If the problem persists, unplug the

projector and contact Epson for
help.

Summary of Contents for Pro L12000QNL












































































































































































































































































































Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands

Epson Pro L12000QNL, User Manual

Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands