Epson Pro L12000QNL User Manual Download Page 189

Page: 189 / 299

189

In the Event Settings section, select the events you want to have occur. (Select

No Change

Off

for events that you do not want to occur.)

Note:

In the

Extended Schedule

menu, you can schedule only one event for Color Calibration or

Screen Matching.

In the Date/Time Settings section, set the date and time for the scheduled events to occur.

When you are finished, select

Save

and press

Enter

To schedule more events, repeat the previous steps as necessary.

10. Select

Setup complete

and select

Yes

to save your changes.

Viewing Scheduled Events
Editing a Scheduled Event

Parent topic:

Adjusting Projector Features

Related tasks

Running Light Source Calibration

Viewing Scheduled Events

You can view any currently scheduled events.

Press the

Menu

button.

Select the

Extended

menu and press

Enter

Select the

Schedule Settings

setting and press

Enter

Summary of Contents for Pro L12000QNL












































































































































































































































































































Search results

Summary of Contents for Pro L12000QNL

Reviews:

Epson Pro L12000QNL, User Manual, Page: 189 / 299

Search results

Summary of Contents for Pro L12000QNL

Reviews: