Epson Pro L12000QNL User Manual Download

Page: 169 / 299

169

Tiling Images into One Image

You can project the same image from up to nine projectors to create one large image using the Tiling
feature.

Note:

Before tiling, make sure the displayed images from your projectors are rectangular, correctly

sized, and focused.

Note:

You can automatically adjust the tiling using the Tiling Assist feature in the Epson Projector

Professional Tool software available for download from the Epson website.

Configuring Tiling Automatically
Configuring Tiling Manually

Parent topic:

Using Multiple Projectors

Configuring Tiling Automatically

If your projectors are on a network and you have identified a master projector, you can configure tiling
automatically.

Turn on the projector.

Note:

Make sure nothing is blocking the built-in camera on the front of the projector.

Press the

Menu

button.

Select the

Extended

menu and press

Enter

Select

Multi-Projection

and press

Enter

Summary of Contents for Pro L12000QNL












































































































































































































































































































Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands

Epson Pro L12000QNL, User Manual

Search results

Summary of Contents for Pro L12000QNL

Reviews:

Related manuals for Pro L12000QNL

Brands by name

Popular brands