7.
Press the OK button.
The screen automatically proceeds after a specific length of time if you do not press the OK button.
8.
Press the OK button.
The screen automatically closes after a specific length of time if you do not press the OK button.
Note:
If an error screen is displayed, make network settings again.
Connect the smart device to the same network as the printer.
Related Information
&
“Messages and Solutions on the Network Connection Report” on page 66
&
“Connecting the Smart Device to the Same Network as the Printer” on page 56
&
Making Wi-Fi Settings by PIN Code Setup (WPS) from the Control Panel
You can automatically connect to an access point by using a PIN code. You can use this method to set up if an
access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
User's Guide
Connecting the Printer to the Smart Device or Computer
50