2-22
Operation Principles
Rev. A
Confidential
(*1):
•
Effective only for the model type with the paper roll supply module
•
This setting lets the printer tell the paper near-end by sending the secondary paper near-end status when the
specified length of paper is fed after the primary paper near-end sensor in the paper roll supply module
detects the paper near-end.
•
If the paper near-end sensor 2 is installed in the printer, the detecting result of the paper near-end sensor 2
becomes the secondary near-end status. (The setting of memory switches 7-2 and 7-3 are ignored.)
(*2): Effective only when using with the cut sheet presenter module.
Table 2-11 Memory Switch 7
SW No.
Function
ON (1)
OFF (0)
Default setting
1
Reserved
Fixed to OFF
OFF(0)
2 and 3
Setting for the
secondary paper
near-end position
Refer to Table 2-12
OFF(0) (*1)
4
Operation after
cutting
Ejects fully
Clamps
OFF(0) (*2)
5
Paper initializing
operation when the
power is turned on
Always cuts
Detects paper’s tip
6 to 8
Reserved
Fixed to OFF
OFF(0)
Table 2-12 Setting for Paper Near-end Detecting Position
Paper length
(for the time between detecting the
primary paper near-end with the near-
end sensor and sending the status of
the secondary paper near-end)
Memory SW No.7-2
Memory SW No.7-3
Approximately 5 m {196.85"}
OFF
OFF
Approximately 10 m {393.70"}
ON
OFF
Approximately 20 m {787.40"}
OFF
ON
Approximately 30 m {1181.10"}
ON
ON
